The Cult has been designed to replace the amazing Samurai range with a sportier, more stable style of kite. It is supremely easy to use with mountains of performance to get you moving in a buggy, on a mountain board or just getting dragged along in the sand. It has a higher aspect ratio than the Samurai range which means a faster turn and it is quicker through the air therefore generating more power per size.

The Cult is available in 6 sizes from 2.0 meters squared to 6.5 meters squared, which covers a huge wind range enabling you to get out kiting in almost all conditions.  

The bridles on the kite have been reduced to a minimum which makes for less drag and a lighter kite, compared to the previous Samurai range there are 30% less bridles. This translates to the kite flying in lighter winds, a greater wind speed to power generated ratio and as the kite can penetrate the window deeper the up wind ability is superb. The stability is kept even with less bridling by the use of D-Rib construction, a method of strengthening the kite from inside to enable less support from the bridles. 

An all new colour scheme enhances the looks of the kite and makes sure you stand out from the crowd. It is available in the four standard colour combinations but you can order any colour combination from the factory, just ask your local dealer.

• Quality is a word that gets used a lot in the kite industry. At Ozone, we don’t take this word lightly; when we use, we mean it. We are proud of our design and manufacturing and think it’s second to none. We’re proud of our design and manufacturing and believe they set a precedent for the rest of the industry.
• Quality begins with design : at Ozone, a quality design results in a kite that handles as well as possible, combined with the highest level of performance and safety.
• Choosing materials : this is a simple issue, when we choose materials, we base our decision solely upon the fact that the materials we use are the best available for the job.
• Kite production : all Ozone kites are manufactured in our own facility. We have total control over every aspect of the manufacturing process, and each kite is fully inflated and inspected to certified paragliding standards before leaving our DHV-approved factory.
• Product testing : Our Kites has undergone thousands of hours of development,from CAD design through to riding in extremes, at -40 0 C in Norway to the baking heat and sand blasts of Chile.
• Mylar Edged
  Aerodynamics tells us that the leading edge and the trailing edge are the two most critical lines in an aerofoil section. Ozone kites are Mylar taped on the leading edge, giving a more rigid structure, a clean and efficient aerofoil, and absolutely zero stretching. The Mylar tape effectively locks the sail shape, meaning your kite keeps it’s factory trim. For the trailing edge we roll the seam twice and stitch to give a soft and clean exit for the airflow.
• Double Stitched
  Ozone kites are double-needle stitched, which is stronger and more durable than single line stitching in the event of the kite being dragged over rough ground. Even our thread used for stitching the lines and sail is UV-bonded, further adding to the strength and life-span of our kites. Every seam is checked to within 0.5 mm; a look at the colour-scheme accuracy and the inside of the seams of our kites will highlight this fact.
• Just remember that only a 1mm error on a cell in a kite with 30 cells leads to an overall error of 3cm, this can make a marked difference to a kites handling, performance and safety!
• Flying Lines
  Tested to 180/110kg, Ozone’s heat-treated Eurocord Dyneema SK75 lines ensure stretch resistance, a high thermal tolerance and durability for all kites. Lines are cut, pre-stretched, sleeved and stitched to ensure 100% accuracy. The lines are final load tested to 60% of their breaking strain to “lock” the line and as a final production check.
• The ‘kook-proof’ colour-coded and labeled line connection system makes set-up safer and completely stress-free for riders new to kiting.
• Bridle Lines
  Our aim when designing the bridle lines is to use the least amount of line possible, to minimise parasitic drag through the air, resulting in a more performant kite. Kite design has advanced to the point where the accuracy and diameter of the line lengths is vitally important. To achieve this accuracy, we use the highest quality Dyneema lines which are stitch finished for extra strength and less drag.
• Attachment Tabs
  Our attachment tabs are sewn deep into the reinforcement area of the ribs, which means that the load is spread over a larger area of material, thus reducing any stretching and ageing of the cloth.